DIY Hall Pass Station

by RYOBI Nation

Aug 10, 2021

This fun and easy DIY Hall Pass Station project will be the perfect addition to any teacher's classroom!

• Project Information

  • Difficulty:	Easy
    Categories:

• Tools Used

  • 18V ONE+ PRECISION ROTARY TOOL
  • 18V ONE+ HP BRUSHLESS 1/2" DRILL/DRIVER

• Materials Used

  • YOUR CHOICE OF STAIN
  • PENCIL
  • PAINT/PAINT BRUSHES
  • RYOBI 18V ONE+ PRECISION ROTARY TOOL
  • SQUARE PIECE OF WOOD, YOUR CHOICE HOW BIG TO MAKE IT!
  • RYOBI 18V ONE+ HP BRUSHLESS 1/2" DRILL/DRIVER
  • SCREW HOOKS
  • SMALLER RECTANGULAR PIECES OF WOOD (THESE WILL BE USED AS THE ACTUAL HALL PASSES)
  • PAINTER'S TAPE

Project Steps

1. Step: 1

   STEP 1: Begin by staining your square and smaller rectangles of wood. Make sure to let it dry fully and stain again if you want the color to darken.

2. Step: 2

   STEP 2: Print out or draw your desired design and words that will be put onto the wood.

3. Step: 3

   STEP 3: Tape down your design using painters tape. Carefully trace out your design and words onto the wood.

4. Step: 4

   STEP 4: Paint your design to your liking!

5. Step: 5

   STEP 5: Use your rotary tool to carefully trace out the words on the wood as well as the outside of your design.

6. Step: 6

   STEP 6: Find a drill bit that is slightly smaller than the screw hooks and using your drill, drill out where you will want the hooks placed.

7. Step: 7

   STEP 7: Drill a small hole into the top of each of the rectangular pieces of wood for them to hang from.

8. Step: 8

   STEP 8: Screw in the screw hooks and place the rectangular pieces of wood on them.

9. Step: 9

   STEP 9: Hang wherever you like!