• Fantastic cart, I will definitely be building one.
    By user_feese_1752017, on March 29, 2021

  • This looks like a very good design; thank you for sharing! Unfortunately, wood prices are so high right now, building this anytime soon with new lumber will be cost prohibitive. However, I may have enough remnants from other projects to build a slightly smaller version. Thank again!
    By artistforhire, on June 16, 2021
View All Comments
  • Great video and good size of workbench, perfect for my place since it is very small. 
    By MrRusoDIY, on June 3, 2019

  • where are the plans so I can print?

    By stuntmom54, on February 9, 2021

  • Wish I could upload a picture with the physical cut list overlay on the (5) 2"x4"x8' boards from using CutList Optimizer (https://www.cutlistoptimizer.com/). It helped me figure out the best board allocation (minimize waste and another trip to the big box store at $6.52 per 2x4x8' as of March 6, 2021).

    To keep the ends clean, I took 1/4" off each end first. Wish I could upload a photo with the physical cut list it produced for an easy layout but here are the numbers from the CutList Optimizer:

    A: 20 3/4" --- B: 44 3/4" --- C: 33 1/2" --- D: 17 3/4"

    1: A, A, C, D
    2: A, A, C, D
    3: B, B
    4: B, B
    5: C, C

    I ended up buying another 2x4 sheet of MDF for the bottom shelf and added four locking casters (rated at 200 pounds ~$5.50/ea) from Harbor Freight for mobility (adds 3 3/8" to height). Heading out to the garage now . . .
    By LanMan20, on March 6, 2021 (edited)
View All Comments
  • I've told Tom already! You guys did an awesome job on the Dream Shop! I actually took the idea of having things on wheels and keeping them the same height. Obviously, my room is a lot smaller, but the idea is what made it work! Great job!
    By MommasAryobiToolJunkie, on February 8, 2018
    • That's great to hear, @MommasAryobiToolJunkie!
      By RYOBI NATION, on February 8, 2018

  • Where can I find the plans for all these ideas? Thank you
    By TroyFowler, on February 11, 2018
    • @TroyFowler you should be able to click the link above that says "view Project PDF" or visit the Dream Workshop website here: https://www.ryobitools.com/nation/dreamworkshop
      By RYOBI NATION, on February 12, 2018

  • The Miter saw cart in the PDF is listed as being 36" tall, which is the same as the table saw cart and supplemental carts, that way they can be used together. However, it doesn't look like the height of the table saw and height the miter saw were taken into account during these measurements. For the tables to align when working with material. Did I miss that in the steps somewhere? Do I need to shorten the measurements based off of how tall my tools are? I imagine for the miter saw I would need to shorten the height by a few inches and for the table saw closer to a foot-foot and half, this way I could place the material over the carts and it'll still lay flush with the saws. Any help would be appreciated.


    By Jakers, on October 10, 2018

  • Please fix the plans!!!  The plans are all wrong for the miter stand and table saw stand. It looks like the plans for the storage cart were simply cut and pasted into the miter and table saw  plans. Really annoying to discover after getting started. Especially since the issue has been around for a couple of years on these plans.  How come you never responded When Jakers pointed it out?   Sloppy. 
    By user_unknown_1615524, on September 11, 2020
View All Comments
  • Quick question- how do you deal with the saw dust from underneath the saw?
    By jkealey, on February 8, 2018
    • We have various vacuum products that work great in the shop for both sawdust and even larger debris.You can check them out on the RYOBI website here: https://www.ryobitools.com/power-tools/products/list/category/vacuums
      By RYOBI NATION, on February 9, 2018

  • I'm trying to download the plans for this really cool garage storage but I can access the button. Can you help me please?
    By user_blakely_1644402, on October 15, 2020
    • First click on the square with the project in it.  It opens up and then you scroll down to the pdf to download.  It took me a while to figure this out, too.  
      By nelk1695, on March 15, 2021
View All Comments
  • I absolutely love this lazy Susan idea. I have a small work area, but this will definitely maximize my efficiency. Thank you Mrs. White
    By jester5042, on February 10, 2018

  • I really like this layout!  In reviewing the plans, step 6 doesn't make sense to me.  How are you attaching the leg/outside shelf board to the cleats?  a 3" screw will not be large enough to connect the vertical leg and shelf bar to the cleat!  What am I missing?

    Thank you,
    By jammer2109, on December 9, 2020

  • What height did you use for the bottom shelf?
    By mjostick717, on April 30, 2021
View All Comments
  • Hi Ana, Greetings from Montreal, Canada! Great project! I was taking a look at the shelves and was wondering... is the left part really 8 feet long? If both your carts are 40 inches long and you add both 2x4 (7 inches total), I come up with 87 inches total... There is a difference of 9 inches. I want to know because my garage wall is a bit small for a 16 feet unit and it would actually be a good thing if it was smaller than what is written on the plan! Can you detail the dimensions of the whole unit so I can check if it fits my space? Thank you so much!
    By Ian Charette-Brousseau, on January 9, 2018
    • Hi Ian! Glad you're a fan of this project! If you haven't already, check out the blue "View Project PDF" link above that gives more details that may be helpful. The total dimensions of this project are: 192 x 24 x 84
      By RYOBI NATION, on January 9, 2018
    • There is no PDF link for this project! Can this be added or emailed. Interested in constructing this, but would like the detail information in the PDF. Thank you
      By eringale, on February 21, 2018
    • You can view more of the steps under when you click the "Project Steps" tab under the video!
      By RYOBI NATION, on February 21, 2018

  • Hi, I just completed the project. Although mine is not for a shop but rather for storage. It will be for a shop once I convince my wife to get rid of everything. One note on the plans: the materials page says 3/8 plywood is used (which I purchased) and in the steps it says 1/2 inch plywood was used for the shelves. I wish I would have read through the plans first as 3/8 inch plywood is pretty flimsy but functional for light items. Overall, great plans so thanks for sharing! Chris
    By Chris Tab, on January 16, 2018

  • Where are the pdf plans I can download for these shelves? Thanks!
    By mshuntinglady, on March 27, 2018
    • There is no pdf for this one. Just "project steps" that you can click through, as well as videos that walk you through it.
      By RYOBI NATION, on April 18, 2018

  • I can't find the .pdf for the Built-in shelves.  Where is it?
    By cayoder, on April 15, 2018
    • Hi cayoder! There is no pdf for this one. Just "project steps" that you can click through, as well as videos that walk you through it.
      By RYOBI NATION, on April 18, 2018

  • Am I missing something? 12 2x4s seems a little short for the project. Was gonna hit HD tomorrow, but I guess I’m glad I double checked the math. 
    By DescentFormula, on April 30, 2018
    • Hi @DescentFormula It has been updated to 20 2x4s. Thanks for asking.
      By RYOBI NATION, on May 14, 2018

  • Thanks for the guide. I'm going to be attaching this to a cinder block garage wall, will I need different screws to hold the wood to the wall?

    By hurricanedj, on May 9, 2018
    • Hi @hurricanedj we reccommend using tapcon concrete screws. You may consider using a hammer drill and drilling pilot holes first. 
      By RYOBI NATION, on May 11, 2018

  • Hello,

    These plans will work great for a shed I recently built.  The shed walls I will be building the shelves on are 10 ft across and 113" tall.  I wanted to build the shelves 8 feet across and include three or four shelves at about 20" in-between each shelf.  I am planning on making the shelving 3' in depth, but I wanted to make a loft type area on each side of the shed, and was planning on the loft spanning across the top of the shed and measuring 4' in width and the full 10' in length across the top.  Using your shelve plans, do you have any ideas on following the plans up to a certain hight and then adding a wider and longer shelf as the top to create the loft or a longer and wider top shelf?  Also, do I see that there are no vertical supports in the center of what look to be 8 foot shelving on the left side.  Since my shelves will be 8' long, can I just put supports on the two sides, as in your plans?  Thanks.
    By CenCOast_DYI, on February 13, 2020

  • Awesome concept here! I'd LOVE to see this modified for a sewing/craft room/office!!!!
    By user_howe_1613808, on September 10, 2020 (edited)
View All Comments
  • My Hubby's dream. Gaming and space for his tools...awesome! But I already told you that on IG!
    By MommasAryobiToolJunkie, on February 8, 2018

  • Awesome project! I'd love to redo my garage with all these ideas.
    By grimreaper, on February 27, 2018

  • What is the wall paint color?
    By mahlesalvage, on March 2, 2018

  • What is the wall color you used
    By mahlesalvage, on March 9, 2018

  • My garage is finished so I do not have the height needed to do this. I would need to make it no higher than 7 foot to allow for the barn door hardware, would I just change the dimensions from 8 foot to 7? Or 84 X 24 x 84? Thanks
    By steve57, on March 10, 2018
    • Sorry for the late reply. I would buy the barn door hardware first then mock it up to see the clearence you want. You may need to leave some room to get the door on and off the track. Good luck!
      By Tom Bury, on April 5, 2018
View All Comments
  • This is such a cool and versatile design. I especially like the hidden storage and chalkboard.
    By grover959, on January 8, 2018

  • How much weight does this table hold?
    By renewedhaven, on January 17, 2018
    • We haven't done weight testing on it to give you an exact answer, but it is a very sturdy table!
      By RYOBI NATION, on February 8, 2018

  • Where do you find the plans?
    By masswood, on February 8, 2018
    • @masswood You can find the plans on RYOBI Nation's Dream Workshop website here:https://www.ryobitools.com/nation/dreamworkshop
      By RYOBI NATION, on February 9, 2018

  • What is the wall paint color?
    By mahlesalvage, on March 2, 2018

  • Great idea and very useful! 
    By Jgarcia779, on April 24, 2018

  • There looks like there’s an error in the cuts. One of the 2x4x8 says cut 2 pieces 40”, but when constructing the frames it later tells you to cut 48”. There are no cuts on the diagram for 48”.
    By AshVann80, on February 9, 2020

  • I'm starting to put together a little workshop for myself and figured this would be a great first project.
    Instead of a chalkboard, I'm planning on using magnetic primer and dry erase board paint.   Will be my first time using those products.

    I'm curious, for the rest of the work bench, what type of finish would anyone suggest, or just leave it raw wood?

    By Bbasselgia, on August 3, 2020

  • Are these plans available in the Spanish language?
    By user_raydon_1710145, on January 23, 2021
View All Comments

back to top?

Asset 1

Join RYOBI Nation

We're so glad you're here! Let's get started.

Welcome to Ryobi Nation!

Please confirm your email address.


Let's build your project feed!

Select some categories to pick the kinds of projects that show up on your home page:

Welcome to Nation

welcome_r2 graphic
Welcome to your RYOBI Nation quick start guide, a fast and easy way to see everything that's waiting for you!
project_feed_r1 graphic
Your feed shows the latest projects from the categories you’ve selected, right on your homepage!
upload_r2 graphic
Are you working on something awesome? Upload your DIY projects today, and share with other members.
contests_r2 graphic
We award monthly and annual prizes for the best projects, worth up to $2500 in RYOBI tools! That’s a lot of hardware, and it could all be yours.
connect_r2 graphic
RYOBI Nation is a positive connection between people who are creating great things.
You can follow fellow members, like their projects, and comment to let them know they’re doing a great job.
notifications_r1 graphic
Come back to RYOBI Nation often to see what is new and to stay in touch.
If you're on a mobile device, don't forget you can add RYOBI Nation to your home screen for quick access to your project feed.

Update Image